Classifieds RSS Feed

★ 1991 Nissan S13 180sx Track / Drift Car ★

Fri, 18 May 2012 12:22:42 +0000

NO COMPLIANCE!! NO REGO!! TRACK CAR ONLY!!

RARE UK IMPORT!

This 180sx is factory badge as 200sx.

Yet to see a track day with setup as ive lost interest in the sport.

Perfect set up for beginners out there who want to start out!

1991 Nissan S13 180sx / 200sx
ca18det TURBO!
5-speed manual
80,112kms

Timing belt changed @ 80,000kms

Front Mount Intercooler Kit
S14 T28 turbo
HKS pod filter
R32 GTR fuel injectors
Turbosmart Blow Off Valve
Turbosmart Boost Controller
X-Force Turbo Back Exhaust System
Aftermarket remapped ECU
Apexi Turbo Timer
Hybrid 2 Stage Electronic Boost Controller
Drift Handbrake button
Sports peddle Set
Front & Rear Strut Braces
Locker Diff

Car has not seen road after installing all the suspension parts below!
ALL BRAND NEW!!!

Fully Adjustable Coilovers
Front & Rear Heavy Duty Sway Bars
Adjustable Front Castor Rods
Adjustable Rear Camber Arms
Adjustable Rear Toe Arms
Adjustable Rear Traction Rods

= $3999

NO I WONT TAKE $1000
NO SWAPS!
NO TYRE KICKERS!
NO LOW BALL OFFERS!
NO RETARDS PLEASE!

SERIOUS BUYERS WITH $$$$ ONLY!

180sx Ducktail Wing

Fri, 18 May 2012 11:59:47 +0000

Ducktail wing to suit 180sx, great condition, painted in white, great condition paint.

TEIN Coilover Springs, 7kg/mm, 65mm ID, 200mm Free Height

Fri, 18 May 2012 11:59:20 +0000

pair of TEIN coilover springs,

7kg/mm
65mm ID
200mm free height

came out of some tein mono flex,

good condition, havent had many kms on them.

$100 for a pair pick up in VIC
$120 posted anywhere in aus

Rb20 Turbo Actuator, Rb25 Turbo Elbow

Fri, 18 May 2012 11:54:33 +0000

RB20 turbo actuator run 10psi just from bolting it up to ur rb25 turbo$70

RB25 elbow off turbo bigger than rb20 one with near new gasket $50

Location: South Australia (can post at buyers expense)

Nathan 0431048440

18 Inch Rays Gram Lights 57D

Fri, 18 May 2012 11:47:16 +0000

18 x 9.5 all round
+22 offset
with 4 tyres R18/40/235
80% tyre tread
Came off a toyota Supra
Stud pattern 5 x 114.3
Will fit Nissian, Toyota, Mazda
Asking for $2000 ono

If you would like to make an offer or you want to look at the rims call John on 0431180644

Stock S15 Suspension,arms Wheels The Works

Fri, 18 May 2012 10:43:50 +0000

Stock gear for sale

Full set good condition s15 stock suspension $150

S15 front castor Ross $80

Rear camber arms $50

Full set of stockies with 80% tread $200

1970 Datsun 1600

Fri, 18 May 2012 10:41:57 +0000

Hey guys,

Up for sale is my 1970 Datsun 1600,

have owned this vehicle for about 12 months and this thing has pleased me from day dot

Body is fairly average with rust not too bad in the standard spots.

Has a Datsun 180b SSS motor and 5 speed gearbox, motor is cammed and has dual 45 DHLA Dellortos fitted.

car has full extractors and exhaust system, 180b front struts with stiffer front and rear springs, upgraded sway bars.

Interior is in good condition not a single crack in the dash, everything is complete all the electrics work.

Car runs great, looks great and is a ball to drive.

Vehicle currently has rego, will go with car if you supply own RWC.

mainly looking for cash but will swap for something of interest.

Anymore info required just let me know.

Also comes with a few boxes of spares including a new manifold and mounting kit for weber.

Please TXT as I dont have time for calls!

Garage Clearance

Fri, 18 May 2012 09:59:12 +0000

Need to clear out my garage !

For sale :
S13/180SX JDM Ducktail Wing (red) perfect condition : ~~$300 ono~~ $250 ONO !

S13 stock rear spoiler (black) with brake light working: ~~50 ono~~ $30 ono

Auto SR20DE Transmission: $150 ono

Auto gearshift: $50 ono

s13 projector headlights, 1 has broken bracket and yellow bulb I think : $80 ono

s13 turbo front bar with vent , abit damaged on edges but nothing severe (Black) : $150 ono

s13 rear bar with damage on corner, nothing a heatgun cant fix (black) : $150 ono

~~R33 Passenger door (moronish colour) good condition : 100 ono~~

~~Honda Springs unknown brand, look aftermarket : 300 ono~~

Private message as my phone sim is goneeeeee !

EARTHQUAKE TREMOR TNT AMPLIFIER / AMP - AS NEW

Fri, 18 May 2012 09:53:46 +0000

Still in as new condition, was only used for a short time.

600 watt, 4 channel and bridgeable.

Pickup is available from Rouse Hill in Sydney or will post at buyers expense.

If interested, please PM or call me on 0468 895 020.

R34 GTR NISMO LIGHTWEIGHT FLYWHEEL - RSR41

Fri, 18 May 2012 09:41:05 +0000

Excellent condition, had only been in the car for a few months.

Great direct replacement for the stock Nissan Skyline R34 GTR dual mass flywheel and 60 - 70% lighter.

Part number is RSR41. More info on weight, features, benefits - etc is available on the Nismo website -

http://www.nismo.co....df/clutch07.pdf

Im looking for $295 for it.

Pickup is available from Rouse Hill in Sydney or will post at buyers expense.

If interested, please PM or call me on 0468 895 020.

GENUINE NISSAN S15 200SX / SILVIA ABS BRAKE UNIT

Fri, 18 May 2012 09:37:56 +0000

Excellent condition, removed from low KM car.

Pickup is available from Rouse Hill in Sydney or I will post at buyers expense.

If interested, please give me a call on 0468 895 020.

S15 OEM Side Skirts, Ram Air Headlight

Fri, 18 May 2012 09:31:31 +0000

S15 JDM 2 Piece Side Skirts in pewter $300

Pair of S15 Yashio Factory front guards in pewter $300SOLD

S15 Ram Air Intake Headlight $200

Kevin

HKS Turbo Timer & Tyre Pressure Monitor

Fri, 18 May 2012 09:31:23 +0000

HKS Turbo Timer Type 1 $30

NEW Orange Electronic In-Tyre Pressure Monitor $170

Kevin

Chrome 17" ,ags

Fri, 18 May 2012 08:27:49 +0000

i have a set of 215/40R17 rims for sale with new tyres chrome peel on one of the rims with a little gutter rash $350 ono
multi fit 4stud

Bride Vios III (copy) + S13 Bride Rail (LF)

Fri, 18 May 2012 08:06:21 +0000

Selling my Bride Vios III copy, bought from Jap warehouse in february, used for less that 10hours (Matsuri). No rips or damage.

pic for ref (google):

Also avaiable, Genuine Bride LF rail (s13 driver side) including fixed back side mounts, bought new from QLD in Feb, same use as above. (Willing to ship interstate at buyers exp)

$200ono --> Rail only
$300ono --> Seat only
$450ono --> both

Contact:
0421 631 330

Sr20de Complete Conversion

Fri, 18 May 2012 08:04:01 +0000

hi there i have a sr20 de auto conversion, can hear running in good condition $600 ono
motor computer, loom, trans,pedals tail shaft and mounts

S13 Coilovers BC Racing

Fri, 18 May 2012 07:46:03 +0000

Up for sale is my set of BC Racing BR type coilovers.

Bought brand new in February for Matsuri, drove 6 sessions around winton and that's it, has done less that 300kms. Still under warranty and have all the paperwork for it (receipts, warranty slip etc). Also have the original c-spanners etc.

Local (Melb) buyers preferred but will ship interstate at buyers expense.
Pic as reference (google)

Asking $1150 firm

Contact: 0421 631 330

2002 VW Bora V6 4motion

Fri, 18 May 2012 05:58:09 +0000

Over Jap cars? Get a classy Euro with luxury but one that's also a decent drive that handles well with AWD and has decent power to get around town. Maintenance isn't as expensive as you think as cheap parts can be sourced online from the US.

Make and model: Volkswagen Bora V6 4motion
Year: 2002
Rego: May 31, 2012 but I will pay for another year.
RWC: Can arrange depending on price.
Transmission: 6-speed manual.
Odometer reading: 136,000km.
Colour: Black.
Interior: Black leather.
Note: The black exterior with black leather is the best combo in my opinion and isn't too common.

Features: Sunroof, heated leather seats, electric mirrors and windows,JVC DVD single din head unit, etc, etc.
2.8L narrow-angle V6 engine 150kW
Haldex AWD system

-Regularly serviced as shown in the log book.
-Haldex recently replaced and serviced (less than 8000km ago).
-Oil and filter change, spark plugs, ignition coils, air filter and cabin filter all changed a few weeks ago.
-Recent wheel alignment.

Mods:
-Smoked side repeaters and headlights
-Tinted windows
-Badgeless grille
-Lowered on KW V1 coilovers (less than 10,000km travelled)
-Miro STP-1 wheels
*Front: 18x8.5 +30 w/ 225/40/18 Kumho Ecsta KU31 (5mm spacers)
*Rear: 18x10 +25 w/ 235/40/18 Kumho Ecsta KU31 (10mm spacers)
-Guards rolled and pulled a bit to fit fatter wheels

The front tyres have outer wear due to misalignment which has now been corrected. The rear tyres have plenty of life left.
The sale will include the stock suspension and stock 16" wheels as well. Also will chuck in a car bra.

Price: $14,500ono.

$13,500 with the stock wheels.
$13,000 with the stock wheels and suspension.

Call me to arrange an inspection or ask any questions.
Please no time wasters or camel toes.

Located in Sunshine, VIC.

Dion

Fri, 18 May 2012 05:35:15 +0000

Sr passenger seat with rails. Grey leather good condition. Pick up this weekend only.

0450882663

R31 Track Car Part Out Thread, SA

Fri, 18 May 2012 04:49:11 +0000

parting out my r31, decent car skidded well, lots of good parts at good prices.

Part:s13 tein coilovers

Condition: not too bad, one has developed a slight leak in the last week or so, still functions well.

Description: height adjustabe, camber adjustabe and damper adjustable, i believe they are SS model which are rebuildabe.

Asking Price:$300 for the set

Part: s13 kts roll centre tierod ends

Condition:excellent, have done about 1000kms

Description: tie rod ends that have inbuilt roll centre to counteract bumpsteer

Asking Price:$125

Part:extreme heavy duty clutch with flywheel

Condition:good, no slip

Description:its a clutch

Asking Price:$200

Part:manual conversion, inlcudes gearbox, pedals, and all the jazz you need except clutch.

Condition:good no crunches from box and all other parts are good

Description:stuff to get rid of that 3 speed auto shit

Asking Price:$400

Part:extractors

Condition:good, probably a few scrape marks

Description:n/a

Asking Price:$100

Part:rb30 motor

Condition:good, runs like a dream, has new plugs, new gates "racing" timing belt, new cam seal, water pump replaced no tool long ago, serviced regularly.

Description:single cam torque monster

Asking Price:$300

Part:obp hydraulic handbrake with 3/4 master cylinder and hardlines to to bolt straight into a 31.

Condition:excellent, handbrake is new but has been cut down, master cylinder is new.

Description:comes with all the fittings and shit to bolt this sucker in.

Asking Price:$300

Part:s13 lca's

Condition:good

Description:n/a

Asking Price:$50

Part:castor rod's with new bushes

Condition:good

Description:they have new superpro bushes

Asking Price:$50

Part:sr20 s13 calipers with new pads

Condition:good

Description:calipers for s13 conversion on 31, with new bendix pads

Asking Price:$200

Part:s13 knuckles and hubs with brand new rotor's

Condition:good

Description:use for s13 conversion in 31

Asking Price:$200

Part:r31 diff with new spool and vn rear calipers

Condition:good, typical little bit of whine

Description:r31 3.89:1 gear ratio, new minispool, vn rear calipers full disc to disc diff

Asking Price:$250

Part:15x6.5 +15 impul mesh with brand new goodride sport tyres

Condition:good

Description:wheels of the japanese variety

Asking Price:$250 for the pair

Part:2 1/2" exhaust system, from cat back with a resinator and muffler.

Condition:good

Description:makes noises

Asking Price:$150

Part:garage 7 s13 tierod adaptor's

Condition:good

Description:used for s13 suspension conversion.

Asking Price:$100

all other parts from the car are also forsale, shell is a S3 in white, very clean.

Pick-up/Postage Arrangements:postage can be organised for parts.

Location:adelaide, SA.

Contact Details: contact me on 0432580074

« Last Edit: Today at 10:47:23 PM by sam2306 »

Cusco Zero-2R Coilovers For Nissan S15 (200sx/Silvia) *Used

Fri, 18 May 2012 04:32:55 +0000

Selling my Cusco Zero-2R suspension. Bought and imported from Japan.

***Rear Pillowball mounts were replaced in the last month of use***

I've since sold my Nissan Silvia S15 at the end of 2011.

They are in excellent condition. Items come as is without C-Spanner (I was not supplied with one)

Shipping cost TBA on interest.

HSD HR Coilovers To Suit S13/180sx

Fri, 18 May 2012 04:21:12 +0000

Got some HSD HR Coilovers to suit S13/180sx (14mm Bolts up front)
Good Condition, you all know what they look like.

100% No Knocks/Leaks

Pick Up only from Hills Area.
Alex - 0413005673

Factory S15 Intercooler With Piping, S15 Fuel Pump

Fri, 18 May 2012 04:14:00 +0000

Took this cooler off my ADM S15 at 75,000kms.

In fantastic condition with original shroud and pipework - would make a great upgrade for older model Silvia/200sx.

$250 ono - will consider shipping interstate if there are interested buyers willing to pay shipping.

Also have a great condition S15 fuel pump, Taken out of car at 85,000kms - upgraded to walbro and no longer need this one - would make a good upgrade to older model Silvia/200sx also.

$100 ono

All items located Adelaide metro south - also have a staggered set of starcorp meshies for sale if anyone is interested, would consider trades.

0401636538

FS/SWAP Clean Pewter S15 - 91k And Fresh Rego

Fri, 18 May 2012 04:13:20 +0000

With a change in circumstances i'm considering selling/swapping my clean Low Km S15.
Looking to sell or swap for a clean little daily or family car plus cash adjustment my way.

Car:
2001 Australian Delivered 200sx S15
Pewter colour
6sp manual
91,000km on the clock
Fresh 3 months rego
Brand new tyres all round
Just serviced last week

Mods:
Pod filter installed, FMIC and piping all powdercoated in Matt Black
Turbo-back exhaust with HKS Dump pipe and stainless twin-tip XForce Muffler
Bleed valve installed and running daily 12psi
Walbro 550hp intank fuel pump
R34 RB25DET 7-blade clutch fan

Other Info:
Purchased car in July 2011 and have kept it serviced every 5000km's at Turbo Tune.
Original floor mats
Stock wheels have been powdercoated satin black with the aim to keep the car as a clean daily driver.
Standard suspension, castor rod bushes replaced late last year with nolathane items.
Super reliable with all the cooling mods and fuel pump - it's ready for more boost by the new owner.
Still have the standard SMIC and Full factory exhaust along with a spare pair of door skins.
Headlights have been recently fully restored and look mint, brand new blue vision bulbs all round.
Car is in fantastic condition, located Southern Suburbs SA.

Asking Price:
$16,500 ono
Very interested in swaps + cash my way for the following cars (clean and low km's only):
- Modified GTI-R pulsar or S14 + Cash
- 2000 onwards Integra/Civic with mods
- Mazda 6 Sport Luxury
- Other luxury spec 2000 onwards family sized car

Not in any form of rush so please no low ball offers or trades for Falcon/Commodore/Magna or variants - SMS of these type will not be responded to.
Let me know what you have. Pictures below.

ROTA Grid R 18X9.5+20 Matte Steel Grey

Fri, 18 May 2012 03:20:22 +0000

Hey all I have my ROTA Grid R's for sale

SOLD pending payment

5X114.3
18X9.5 +20 all round

only purchased a few months ago and come with 90% new model Neuton's 235/40/

$1200 for quick sale

Located In Mitcham SA 0411 768 931

Canon 10-22mm F3.5-4.5 Wide Angle Lens

Fri, 18 May 2012 01:59:05 +0000

Hi Guys,

Up for sale i have my Canon 10-22mm wide angle lens.
The lens was bought back in august 2011 and thus is still under warranty (australian stock). The lens has had a 77mm UV filter on it since new so all aspects are in excellent condition.

Lens comes with original box, manual, cd and also the additional genuine lens hood.

Reason for sale is that im buying a Nikon!

Free shipping interstate

Price - $650

Any questions please let me know

Thanks,
Luke

Sparco Evo 2 Seats - Rota Grid-R Wheels

Fri, 18 May 2012 01:01:46 +0000

Hi Guys,
Got some stuff which i want to get rid of;

1) Rota Grid-R wheels – (Fronts) 17x9 +12 (Rears) 18x10 +15 with brand new tyres all round, 215 fronts, 225 rears Brand New!! Nice stretch $1300

2) Sparco Evo 2 fixed back bucket seats - Pair, has openings for a 5 point harnesses and comes on custom rails to suit R32 $1200

3) 2.75inch jap jasma approved cat back exhaust system with mid muffler and rear muffler/round tip. $250

4) 3" just jap front/dump pipe bell mouth opening - almost new few scratches from car being low $50

5) Drift blue catch can with bracket, almost new couple little scratches $50

6) Billet aluminium oil cap to suit SR/RB $20

7) R32 Front guards Left and Right Hand Side $50 Each

Please Call Anthony 0411 117 167

2871R + Injectors

Fri, 18 May 2012 00:41:07 +0000

Hey all,
I've got a few parts left from stripping down my 180sx drift car.

GARRETT 2871R .86 rear
FANTASTIC CONDITION.
Was from Jarrad Ridgeway's old 180, before I bought it from him he had it stripped down by MTQ and inspected - Rear housing had some heat cracks around wastegate, so the rear housing was replaced - The turbo has only done a handful of sessions at Mallala since being pulled down.
Made 230rwkw @ 18psi on my unopened redtop SR.
Comes with;
Cast manifold (new gasket between turbo/manifold)
All braided lines.
S/Steel dump/front pipe with vented screamer (done right with a devider plate between the internal gate and exhaust outlet)
Full stainless steel exhaust suit 180sx/S13 with a big straight pipe out the back (looks gangster as f**k ya huurd)
Full kit ready to bolt on and boost the f**k up.
Want $1,200 the lot

Highflowed S15 injectors. 740cc
Injectors were sent away to a bloke in NSW - Replaced pintle caps, O-Rings replaced, and all flow tested and came up great.
They flowed 230rwkw @ 18psi on E85 on my unopened redtop SR20 and were still far from reaching max duty cycle.
Great injectors.
$400

CALL 0433830055

SR20 LIGHTENED FLYWHEEL,SARD FUEL REG,S14 LSD & SHAFTS+MORE

Fri, 18 May 2012 00:40:58 +0000

Jasma Lightweight/Hardened Flywheel weighs 5.9kgs Suit S13/S14– An awesome upgrade for any laggy car I would recommend using it only with something like a 2871 or bigger and because its hardened you will need either a button clutch or bigger as it tends to have less bite than the standard but it makes the car a lot easier and smoother to drive I was going up hills in 4^th LOL one only selling due to selling my engine setup $250 FIRM

Blown sr20 gearbox - $100

200sx s14 Front and Rear Shocks and Springs Lowered $150

200sx s14 r200 Vlsd - $150

200sx s14 Drive Shafts - $50 Each

200sx s14 Rear Hubs - $50 Each

Sard Fuel Pressure Reg with Sard fittings & Gauge (they almost cost more than the reg LOL) - $150

CA/RB HKS sandwich plate and relocator no lines - $100

R33 GTR Rear Knuckles and drums NO WHEEL HUB/BEARING - $150pair

200sx s14 Exhaust Midsection - $80

Sr20 N/A Flywheel - $50

S13 Boss Kit NEW - $20

S13 Rooflining - $40

S13 Steering column with key - $50

CA18 Exhaust manifold Gaskets Genuine Nissan - $30

ALL LOCATED IN SYDNEY
CONTACT Nicko 0412400500

MANIFOLD, POD, BOV & MORE!!

Fri, 18 May 2012 00:30:57 +0000

Advance S13 SR20DE Extractors in good nick, inc O2 Sensor $200
~~R34 Sidemount cooler (see below for comparison) GREAT Upgrade for stock S13 cooler $80 (or pay $250-600+ for an ARC Sidemount)~~
Stock SR20DET REDTOP ECU $70
Blow off Valve (Turbosmart?? GFB??) $50
~~Turbosmart Boost controller $40~~
S13 SR20DET Standard exhaust Manifold (all studs are there) $50
~~S13 SR20DET Stock Dump/o2 sensor $40~~
NEW GKtech Rocker arm stoppers (Save $$ On postage if local) $45
180SX Type X Style Clear Aftermarket lights with Plug/Play wiring $50
K&N Pod Filter, Good nick, just dirty (washable) $25
Standard S13 SR20DET Blow off Valve. Includes Piping to fit with front mount Cooler $50
SR20 Stock Actuator $10

Heaps of other stuff here --->> http://www.nissansil...em&item_id=3392

Located Northern Suburbs SA, Pickup from around CBD may be possible, most items can be sent interstate no probs

Feel free to make reasonable offers

***PICS BELOW***

Contact 0409 069 251

Cooler dimension comparison
R34 GTST
Length: 205mm
Height: 220mm
Depth: 80mm
Volume: 3608cm3
'Hot Flow' Area (Height x Depth):176cm2

ARC CA18 Upgrade
Length: 250mm
Height: 200mm
Depth: 75mm
Volume:3750cm3
'Hot Flow' Area (Height x Depth):150cm2

ARC SR20 Upgrade (Approximate only)
Length: 260mm
Height: 190mm
Depth: 75mm
Volume:3705cm3
'Hot Flow' Area (Height x Depth):142.5cm2

Stock S13 Cooler (SR I think)
Length: 168mm
Height: 220mm
Depth: 58mm
Volume:2144cm3
'Hot Flow' Area (Height x Depth):127.6cm2

CHEAP S13 Parts - HEAPS! Turbo+NA SR20etc

Fri, 18 May 2012 00:30:52 +0000

Updated 28/04

MORE PARTS Here ---> http://www.nissansil...em&item_id=7382

I have a whole lot of stuff thats getting in my way. Will add other things as I remember
Don't like the prices? Make an offer

Pm or SMS for quick response.
Can MMS pics by request no probs (0409 069 251 for pics)

Located northern suburbs Adelaide...can usually meet near the city during business hours on weekdays. Happy to post/TNT most bits too!

HAPPY TO TRADE ANY OF THE BELOW ITEMS FOR THE FOLLOWING:
*SR Stock rims (Or other 4 stud rims of interest)
*Momo Race or Nardi Classic etc steering wheel
*Non Cut 180SX Parcel Shelf
*Decent fitted floor mats & Dash Mat (Suit HU Display dash)

~~$400 4 Stud wheels with new tyres HERE~~

*Clear Aftermarket Type X Type rear Lights $50ono
~~*Stock SR20 Dump/02 etc $30~~
*Turbosmart (or copy?) Atmo Blowoff Valve - Black, Ex cond $50
~~*No Brand Front strut brace, Ex Cond $50~~
*Turbosmart bleed valve ex Cond $50
*Stock T25 Turbo Actuator $20
~~*Stock 91 180SX Rear Seats, Very good nick, no tears, could use a clean $30~~

~~*560CCA Battery, 18 Months old $60~~

*Silvia rear interior plastics $20

*NEW IN PACKAGING GKTech Rocker Arm Stoppers $45

*Standard VS V6 Commodore Thermo fan/Shroud in VGC (always amazed me how well these work!) $40

GEARBOX/CONVERSION RELATED PARTS
*Stock S13 Gearbox Mount $20
*Spacer thing (sandwhich plate?) that goes between the engine and box...suit Auto or Manual $20
*SR20 Auto Flexplate/bolts etc $??
*Stock S14 manual shifter has been shortened and has little thread left $10?
*SR20 Thrust bearing (NEW...came with my extreme clutch kit) $20
*Shifter bushing, genuine brand new $??
*SR20 Auto torque convertor, shifter,etc $20 the lot
*S13 Speedo sensor minus gear cog (great spare if you've destroyed yours due to lowness) $40
*Auto SR Tailshaft in EXCELLENT CONDITION. Good if you want one to modify for you RB conversion etc $20

SUSPENSION STUFF
*Stock rear camber arms with fresh Energy suspension bushes $50pr
*S13 Rear knuckles with fresh bushes installed $130
*Swaybar, Stock S13 one (Fits A31 as well?) 16mm, solid $???
*S13 standard castor/tension rods. Need new bushes $20

SR20DE SPECIFIC PARTS
*Stock Intake pipe (SHORT bit)$10
*Stock Intake pipe (LONG bit)$10
*N/A Engine Loom complete (Can separate if individual plugs are wanted) $50
*Inlet Manifold $20
*Stock N/A Exhaust mani $10
*Stock N/A Heat shield $10
*Oil filter block w/Sensor (Stripped the thread on yours? )$20
*Various Pulleys $10?ea

RANDOM S13 RELATED STUFF
*1x White SR stockie with a tyre thats good for holding air $10?
*Stock Clutch fan (all there, but center and outer have been separated) $25
*CA18DET Coil Pack Cover in VGC $25
*SR Water Pump $10

NON SPECIFIC PARTS*
*Random Momo style leather steering wheel...good quality and solid...but blue and faded. Good for a track hack $15
*SoundStream 12" Tarantula Grille in Ex Condish $20
*12" Ported sub enclosure. Nice and solid, but more suited to Commodore than an S13 size wise $10

SHITLOADS of Magazines....mainly Street Commodores (probably most if not all issues up to around 2005/6?) and some old/new school Street machine/fast fours...some motor, some Wheels, Some HPI, some Zoom, etc etc. Theres some really cool old ones in there with articles on the R32 GTR when it was released, some HDT stuff...pretty much a bit of everything. Left over from my Car mag obsession circa 1999-2006...probably 2-300 in all.
Happy to part with the lot for $50 if you just get em out of here. The price for cherry pickers wanting only certain brands or singles will be adjusted accordingly

I also have some parts from a VS V6 Commodore here, all in good working order or near new, salvaged from my Wagon that was fire damaged at the back:

Bonnet struts, with ball bit (Should suit VL?) $20

~~Top gun leads...Set, with insulators. Very little use $30~~

~~Alternator in EX Cond $50~~

Standard Airbox with snorkel and MAP/MAF? Sensor etc. $50

Near new drive belt thingy $??

~~Coil packs mounted to ignition module thing $60~~

LPG Electronic control modules $??

Assorted Bosch relays $5 each

Make an offer if you don't like the prices...Not really sure what some of this is worth

More pics to come

Cheers,

Dre

VIP Y31 CIMA

Fri, 18 May 2012 00:00:24 +0000

Hey guys, it pains me to do this. But its time for me to move on from this car. Over the time ive owned it i have put alot of time,effort and money into getting it to a useable state. It will be sold as a rolling shell only requiring another engine and box to be dropped in to get it sliding again.

parts list (i think) of what will be left on the car at this stage

-CAMS approved 6 point rollcage built by walker chassis

-r34gtt front calipers w/endless pads
-s14 hubs and rotors
-D2 front coils w/cusco pillowball cambertops (made one off by the cusco factory)
-thick as f**k front swaybar (no brand name on it)
-cusco adjustable castor rods
-rear JIC coils (one is leaking a fair bit)

-custom tailshaft to suit rb boxes
-1 f**king expensive brand new front windscreen
-genuine junction produce bodykit (font bar is a little worse for wear )

-35ltr alloy fuel cell
-Mallory low pressure lift pump (rebuilt to brand spanking new) **surge tank and push pump not included**
-speedflow pressure release/rollover valve
-new high pressure powersteering feed line made by pirtek
-the usual intercooler

Will be rolling on some junction produce wheels, they look similar to Eurolines

Price is negotiable. Reasonable offers are welcome.

more pics available on request

****The longer this car sits, the fewer and fewer goodies its likley to come with, i am making a massive loss on this car already so get in quick****

180sx TailGate - Carton Of Beer

Thu, 17 May 2012 23:42:48 +0000

Have a 180sx TailGate, silver/gold in colour, spoiler holes. Glass is not cracked, Gas struts still work.
No wiper or motor.

Price: Carton of Super Dry Cans

0412 522 167

NISSAN MAXIMA / INFINITY M30 AFM AIR FLOW METER (PURPLE LABEL)

Thu, 17 May 2012 23:35:49 +0000

Factory AFM from

1989-1994 Nissan Maxima 3.0L V6
1990-1992 Infinity M30 3.0L V6

Part No. 22680 16V00 A36-000 N60

Comes with plug. Person I bought it off took it off his s15. I have no need for it as I forked out extra for a z32 AFM. No mesh on either side but you don't need it. Was in working condition when taken off the car

Willing to post at buyer's expense

GENUINE NISSAN JAPAN OIL FILTERS FOR S14/S15

Thu, 17 May 2012 23:35:28 +0000

Part number 15208-65F00

BRAND NEW!!!

5x available

There have been a lot of consumer issues with the cheaper USA models of this filter with cardboard end caps. These are updated Japanese made ones that feature heavy gauge all metal end caps and are far higher quality than all previous models of the same part number.

Nissan Australia oil filters retail for $20+

$14 each for these ones

Bought in bulk for my s15 but am now selling it so I have no use for these anymore

Can post at buyer's expense

Can't go wrong with genuine Nissan Japan. Top quality.

BNR32GTR Must Sell R34 RB26dett Eqipped...

Thu, 17 May 2012 22:26:54 +0000

After long thought the time has come to upgrade to a 34gtr vspec..

so up for sale is my

1989 BNR32GTR

Awarded "Best R32" of SAU Nationals 2011

I consider it immaculate for its age

EXTERIOR:

Gunmetal Grey
Full NISMO bodykit
Tinted Windows
custom tow hook

INTERIOR:

NISMO 320kph dash & Guages (reading 128,000km)
Alpine sound system with sub & ipod connection
GTR floormats
APEXI Power FC
ATTESA AWD/RWD switch with torque adjustor
Climate control mounted in centre console

RUNNING GEAR:

R34 GTR RB26DETT 165psi across all 6cyl (oct 2011) 105,000kms
rebuilt head with Tomei adjustable Camshafts, Tomei Cam gears
Greddy timing belt, NISMO injectors, Garrett GT2860-7's Z32 AFM's

Rebuilt Gearbox with Redline oil used (oct 2011)
NEW NISMO super coppermix twin plate clutch (oct 2011)

Custom made AM PERFORMANCE dump pipes/stock cat and HKS cat back

Whiteline Swaybars
NISMO strut bars
Rebuilt brake calipers with drilled and slotted RDA discs
new pads
K&N oil catch can
Huge radiator
FMIC (sprayed black)
walbro fuel pump
NEW BC coilovers (Sept 2011)

Stock wheels with brand new TOYO T1r's

Stock GTR seats good condition

light weight Duralinium wheel nuts
Premium plates

All receipts have been kept for the work done on the GTR - most of which happened within the past 12 months
and total well over the asking price!

6 months registration
$650 recently spent at Japanese Motor Sports for a service etc.

currently running 247kw @ 14psi and now ready for a 300kw+ tune
always run on bp ultimate and warmed up/cooled down

no leaks or any signs of mechanical wear due to all the new expensive parts.

PRICE: $21,900 as above

other items that can be included in the sale for extra $

2x Brand new Bride style Gias II buckets $750
Brand new deep corn Nardi leather steering wheel $280
AM performance decat pipe and full catback twin pipe system $400
Brand new set of ROTA Grid R wheels 18X9.5+20 with good 90% tires $1200

or lot for $23,500

and open to swaps plus cash for r34 gtr (other swaps considered too)

non-smoker

Car speaks for itself

only bad points:

slight bubble in dash (passengers side)
Subwoofer cuts in and out on bumpy roads (wiring)
chip in drivers side rear side skirt up under the wheel
dash de-mist vent cover missing
stock steering wheel is worn
Air conditioning is uninstalled (weight reduction!!)

Car was entered in this years all japan day

- nothing to hide so feel free to call me on 0411 768 931 for any questions and any inspection welcome

car located in ADELAIDE SA

More pics here: http://www.skylinesa...6dett-equipped/

GENUINE SSR SP1 3PC

Thu, 17 May 2012 22:25:45 +0000

Hey all.

Got a SET of SSR SP1, chrome lip and black centre. They are in excellent condition. NOT BUCKLED OR DAMAGED, NO CRACKS NOTHING.

Reason for sale:

I only want to get rid of the front sets, but if you are willing to take the whole set both front and rear then do so.
I will not however sell the rear on its own. It's either you take the FRONTS or the whole set. i repeat REARS are not for sale unless you take the whole set.
only wanting to sell the FRONTS.
reason being is because for my application the fronts are abit to heavy and big for what i need them for, however they look great and they DO NOT RUB.
I will be getting the same rims but just smaller in width that's why im selling the fronts. see pics and PM me if interested !

In no rush as they are fine on my car now.

by the way they have genuine tanabe stickers on all 4.

specs :

18X9 +29D
18X10 + 24C

Asking price

$1300 for FRONTS
or take the SET for $2400

They are wrapped in Yokohama Advan's 245/40/18 fronts and 265/35/18 rears
*Free D1 Nuts black and Work Nuts Blue if you buy the SET only*

See photos below

Stock OEM 200sx S15 6 Speed Clutch & Pressure Plate,

Thu, 17 May 2012 22:22:01 +0000

S15 6 speed stock clutch disc , pressure plate ,9 bolts & bearing assembly.

What you see in the pic is what you get,

Removed from a 80,000km ADM. Removed due to upgrade to a heavy duty Clutch.

$100 pick up from taylorslakes melb. Call / sms 0422756270 if interested.
Can send with a cheap courier service australia wide at buyers expense. Contact me for quote.

STOCK JAP SPEC S15 SR20DET DUMP PIPE & FRONT PIPE

Thu, 17 May 2012 22:21:37 +0000

STOCK JAP SPEC S15 SR20DET FRONT AND DUMP PIPE

In very good condition, comes with the heat-shield on the dump, the length of this is a little different to the Aus spec SX's.
CAN ONLY BE USED ON THE JAP SPEC S14's & S15's

$70 pick up from Taylorslakes (Melb) or can send with a cheap courier service at buyers expense - Call /sms 0422756270 if interested.

17" ROH Drift R Rims

Thu, 17 May 2012 15:19:17 +0000

hey all, selling the wheels i had on my falcon due to going bigger. They are in good condition, few gutter scratches as you would expect. Excellent condition tyres, 5x114.3.

After $450.

S13 Crystal Taillights

Thu, 17 May 2012 15:16:56 +0000

Hey all, selling the spare set of crystal taillights i have. I picked them up for when i eventually broke my current ones but could use the cash. Im sure after i sell them i will break my current ones lol. Just missing bulb holders but just use the ones out of your standard lights.

$150.

COMPLETELY STRIPPING 180SX HEAPS OF AFTERMARKET PARTS

Thu, 17 May 2012 12:11:11 +0000

FOR SALE
- Complete S15 Dash with CF console and Cluster
- 180SX/S13 LED digital climate Control
- S13/180sx rear seats in red leather
- Type x rear lights with RPS13 CF garnish
- Type X spoiler
- 180SX wangan spoiler
- Koyo Radiator with fans
- Red pullys for SR20
- Full rebuilt alternator and starter motor
- SR22DET engine
- R33 Front caliper Rebuilt
- Front Alloy 5 Stud conversion
- 4000xs Front rotors
- Rear apexi Rotors
- Rear R33 Caliper rebuilt
- Kakimoto catback exhaust for 180sx/S13
- HKS relocation plate with oil thermostat
- Spitfire Coil pack
- Greddy E manage with SR loom
- Front universal canards
- CF SR20 NON vct spark plug cover
- CA18 samco Rad hose
- supermade copy headlights 180sx
- Apexi Gauges
- Apexi super induction with V35 AFM
- R32 GTR fuel pump
- Type x Rear pods with valance
- Apexi Multi checker
- Billion power steering can
- Sard Fuel press regulator
- Volk GTC 17x9 +22 PAIR ONLY

CALL: 0406 487 163 SMS ONLY
CHUCK ME AN OFFER FOR ALL PARTS
OR INBOX ANTISH BUCHA ON FACEBOOK

S13 "NAVAN" Automatic Transmission Shifter

Thu, 17 May 2012 12:03:22 +0000

Hi all,

Not sure if there'll be any interest, but I have a "navan" automatic transmission shifter for S13 for sale. Apparently it was an optional item.

Looks better than a stock auto transmission shifter. In excellent condition, only a small amount of wear marks from use.

Make me an offer if interested. Selling because I converted to manual.

Can drop off in Melbourne on the weekend, or gippsland during the week, or post (buyer pays)

WTB : S13 SILVIA

Thu, 17 May 2012 11:39:23 +0000

Sold my sil about 2 months ago and regreting it like hell
so looking for a new one ")

Im looking for :
Any colour
hopefully manual (wishful thinking)
Ca or sr dont care.
Running, with as little wrong with it possible.

Ive got about $2000 so... Doent have to be the holy grail
anyways pm me, located in victoria so closer the better
cheers

American Staffy Stud

Thu, 17 May 2012 10:37:03 +0000

Have a male american staffy for stud pm for details

Baz 0402 557 957

S14 S2 Registered Shell

Thu, 17 May 2012 10:31:27 +0000

so i have finished wrecking my s14 and there is nothing left

its blue 1997 model has front and rear end damage completely striped but still registered till the 31/5

800

contact me on 0421874631 (txt only)

96 Sil80 Drift/Track/Street $7k Ono

Thu, 17 May 2012 10:13:58 +0000

Hey Guys just putting my Sil80 for sale because I've bought something else!
Specs are:
96? 180SX with S13 Silvia front
Manual
Locked diff
ISC coilovers, I bought new and have only done 2 drift days
5 stud (S14 front brakes and knuckles)
Blacktop SR
S/S mani
T28 BB
HDi EBC
HDi FMIC
Cusco catch can
3" Turbo back
Type X taillights

Car is still registerable, had plans to register it but never got around to it. Was double defected in SA though.
Have a standard airbox, SMIC missing 1 pipe, and standard suspension for a bit extra.
It has a boss kit on it which makes the airbag light come on... Got the standard steering wheel too though.
Also the handbrake lever has gone wak, I had a drift button on it and pulled it off and the button and mechanism came with it... Now I can't get it back in there to work normally. Works great as a drift handbrake though!
Probably forgotten some other stuff, any questions PM me, SMS or call zero four58 175 999
Trying to add pics, uploader is being shit!

Rs-Gt's

Thu, 17 May 2012 10:11:32 +0000

Have a Set of rs-gt's for sale near new condition, has got nankang tyres on them too
size is 225/45/18 and not sure of offset, they are multi stud stud pattern 114.3x5

NEED these gone asap!!!

looking for $300 now

FS: S14 Series One Bonnet - Silver

Thu, 17 May 2012 09:36:51 +0000

As stated, S14 series ONE bonnet for sale.

Silver in colour, in good condition no dents or anything like that. Selling as no use for it.

After $200, will post at buyers expense (don't ask me to get a postage cost unless you definitely want to buy this).

Can provide pictures if you actually intend on buying, if not please leave me alone.

FS: Z32 AFM (No Plug)

Thu, 17 May 2012 09:34:09 +0000

As stated, Z32 afm for sale. No plug.

Will post at buyers expense. Selling because I have no use for it.

$200.00

Any questions ask away.

WTB Sr20det Rocker Covers

Thu, 17 May 2012 09:26:49 +0000

I'm after any used sr20det rocker covers in reasonable condition, don't care if they are scratched and rough looking just no deep chips or warped covers.

Black top and red top
Let me know what you have got.

Daniel - 0408 282 242

S14/s15 Rocker Cover Fresh Custom Paint

Thu, 17 May 2012 09:09:55 +0000

I am selling the Valve cover for an S14/S15 SR20DET. It has been Powdercoated white then painted it in high quality VHT heat resistant Gold and then clear coated. The cover has not be used on a car since being painted.

Will post either Aus post or Express Courier depending on location.

$20 to post

Inspection before purchase is fine if you live in Adelaide.

$200
Daniel - 0408 282 242

Also have thid one
S13 SR20DET painted in VHT bright orange.

$160

R32 GTR Front Seats (SWAP For Brides)

Thu, 17 May 2012 09:06:20 +0000

Hey guys got a set of R32 GTR seats in mint condition with rails to suit s13, no tears rips or damage.

im looking to swap these for a set of Brides with rails for a 98 180sx Type X

Let me know what u guys have!

Throw me some offers.

Mob: 0430123069

85" Wing Span Extra 260 R/C Plane

Thu, 17 May 2012 08:58:52 +0000

Brand New
85" Wing Span Extra 260 R/C Plane
Suited for 75cc Gas motor or big electric setup

26cc Gas R/C 2-Stroke Boat

Thu, 17 May 2012 08:47:12 +0000

Brand New, only started once
26cc Gas R/C 2-Stroke Boat
2.4 Radio
Ready to Run

BEAKS Tie Bar - BENEN Rear Tow Hook - ASR Subframe Brace

Thu, 17 May 2012 08:14:57 +0000

Got these as part payment for something else I sold.

I don't have an EK so they are no use to me.

They are all replicas from what I was told.

Item: Gold ASR Subframe Brace with mounts/bolts etc

Item: Gold Beaks Tie Bar with brackets bolts etc

Item: BENEN Black Rear Tow Hook with brackets/bolts etc

Location: OLYMPIC PARK - Sydney (Can also meet at macquarie uni on some nights)

Price: $200 for everything - not phased if you can get it cheaper from your cousins daughters dogs nephews sister inlaws uni lecturer. Not negotiable.

Not interested in swaps either unless its for your sister and she's Asian.

Pictures:

2000 Wr400

Thu, 17 May 2012 07:57:32 +0000

2000 WR400
street rego (expired)
Engine rebuilt by my old boss (500-1000kms ago)
YZ plastics
stock plastics also
good tyres
yz pipe with baffles removed (baffles also come with)
comes with spare carby

**due to sitting for a while the fuel tap is now leaking.
***i replaced the carby with a new second hand one so the float needs to be adjusted and idle screw set
its about $120 to get the bike running (quoted from adelaide japanese bikes)

need it gone as i dont have time or money.

$2200

XHP Shorelines

Thu, 17 May 2012 07:56:10 +0000

20" Chrome XHP Shorelines Wheels & Tyres for sale
OR
Swap for some stockies (Black steel rims) and tyres - 17's prefered (5x114.3) & cash my way

Set of four. 5x114.3 (Skyline, Ford etc)
Nice Dished Rims, Dish = Good
good rubber, one wheel has gutter rash but aprt from that they are awsome looking wheels
Need them gone asap

$650.oo neg

S13 Ca Seats + Swap Cusco Brace

Thu, 17 May 2012 06:57:13 +0000

1x standard s13 ca passenger seat + 1x brown trim s13 ca drivers seat. Drivers side has slight corner wear near the door and is also missing the bolt that holds the seat belt arm on. Overall both in great condition.

-$50

Also I'm looking for an s13 ca factory nissan/nismo strut brace or a cusco one in the same style. The one with the big bend over the plenum. Happy to swap my flat cusco brace for either if anyone is interested.

Seat pick up from Geelong.

Pignose 180sx Conversion.

Thu, 17 May 2012 06:56:13 +0000

hey all,

I recently sold my s13 silvia which I had purchased and fixed up some 180sx guards, bonnet, headlights and front bar. with intentions of making a onevia.

As I now don't own an S-chassis, I need to sell my front end conversion. perfect for someone wanting to make a onevia or wanting new, good condition panels for their 180.
the bonnet, guards and headlight covers are all in base primer, I've repaired any cracks and splits in the guards and now just needs to be sanded and painted!
the front bar is a plastic pignose front bar which I purchased brand new.

I'm hoping to sell as a complete conversion, if it doesn't sell within a month, I'll part the front out

$750 and comes with everything.
contact leigh on 0418-221-075.
cheers